Effect of Concrete Additives on Concrete Quality


7e75bd7f30b0368305f97529a68d631c

(Effect of Concrete Additives on Concrete Quality)

Concrete is the main raw material of modern construction engineering, and it is welcomed because of its high strength and long service life. In the process of concrete mixing, adding appropriate amount of admixture can improve the performance and quality of concrete.

 

Concrete Additives

In general, the substances added to concrete to improve the performance of concrete in the mixing process and before mixing are called admixtures. In general, the quality of the admixture mixed into concrete shall not be greater than 5% of the cement quality.

 

Retarder, accelerator and early strength agent can adjust the hardening property and setting time of concrete.

The main function of admixtures such as air entraining agent, water reducer and pumping agent is to improve the rheological properties of concrete mixture and make it easier to be pumped to the designated location.

Admixtures such as waterproofing agent, air entraining agent and rust inhibitor are used to improve the durability of concrete.

In order to improve the other properties of concrete, admixtures such as colorant, aerating agent, antifreeze and expansive agent need to be mixed into concrete.

 

Influence of Superplasticizer

It would affect the collapse degree of concrete.

In general, a certain amount of superplasticizer is added to concrete to achieve the purpose of increasing the collapse of concrete, which can effectively improve the workability of newly mixed concrete.

 

Experience shows that the collapse of concrete without superplasticizer within 1 hour is less than that of concrete without superplasticizer. The main reason for this phenomenon is that concrete still needs to go through the processes of mixing, transportation and pouring after adding superplasticizer. Therefore, it is necessary to use the method of adding water to restore the collapse of concrete mixed with superplasticizer in the concrete construction site, but this method will significantly reduce the performance such as coagulation strength, which may lead to concrete cracking, abnormal hardening and other phenomena.

 

In order to effectively solve the problem of collapse loss of concrete mixed with superplasticizer, it is suggested that the method of adding superplasticizer in batches and post-admixture should be adopted. The batch mixing method can not only effectively avoid the loss of concrete collapse, but also control the production cost to a certain extent and realize the benefit of concrete construction.

 

Function of Antifreeze and Early Strength Agent

Antifreeze is a kind of admixture which can prevent the moisture in the material from freezing at low temperature. for example, when the project is below zero in winter, it can make the concrete work normally at low temperature.

 

Early strength agent refers to the admixture which can improve the early strength of concrete and has no significant effect on the later strength.

 

When the anti-freezing agent is constructed in winter, when the concrete strength reaches a certain limit value, because the structure has been initially formed and has the ability to resist frost heave damage, the concrete will not be frozen even if it is frozen again, which is called the anti-freezing critical strength of concrete.

 

Concrete early strength agent refers to the admixture which can improve the early strength of concrete and has no significant effect on the later strength. The main function of early strength agent is to accelerate the hydration rate of cement and improve the early strength of concrete.

 

Antifreeze is that when the temperature of the concrete project is zero or below zero in winter, it can make the concrete work normally at low temperature.

 

The early strength agent does not contain chloride ion and has no rust effect on steel bar, so it is suitable for all civil, industrial buildings and prestressed reinforced concrete members, mortar and so on. It is most suitable for construction at low temperature in early winter and early spring. When used in Portland cement, it plays a particularly significant role in strengthening and modifying slag cement.

 

Concrete Additives Supplier

TRUNNANO is a reliable concrete additives supplier with over 12-year experience in nano-building energy conservation and nanotechnology development.

If you are looking for high-quality concrete additives, please feel free to contact us and send an inquiry. (sales@cabr-concrete.com)

We accept payment via Credit Card, T/T, West Union, and Paypal. TRUNNANO will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.


a0102e8c504112f5f814bcb746740505

(Effect of Concrete Additives on Concrete Quality)

Contact Form

Newsletter Updates

Enter your email address below and subscribe to our newsletter