Foaming Agent For Aircrete

(Foaming Agent For Aircrete)

Aircrete is a foam concrete that is produced by adding a special foaming agent to a conventional concrete mix. This allows the foam to be distributed evenly and uniformly throughout the slurry.

foaming agent for aircrete

To achieve a stable and effective foam, the foaming agent needs to be of a specific weight and strength. This is why it is so important to use the right dilution rate and to weigh out the foam before you make your aircrete mixes.

The proper density of the foam is also crucial. The dilution should be as accurate as possible to ensure that the foam stays a consistent thickness and consistency. This can be achieved by weighing out the liquid foam mixture before you begin and measuring it out at each step in the process.

This is especially important when mixing the foam in with the mortar. If you mix the concrete too long or too vigorously, the bubbles can collapse destroying the strength of the foam.

It is also possible to damage the bubbles in your foam by putting too much water or by using a too large of a pumping capacity. It is advisable to only use a small amount of water at a time and not to pump the FC too much over great lengths or heights.

The combination of water-resistant and fire-resistant qualities makes aircrete an ideal construction solution. It can help prevent the spread of flames in homes located in areas with a high risk of wildfires, and it can reduce moisture penetration into walls by creating an air barrier.

(Foaming Agent For Aircrete)