How to mix cement materials in foam concrete construction?

(How to mix cement materials in foam concrete construction?)

Cement is the main raw material of foam concrete. Because foamed concrete is mostly cured at room temperature and mixed with a large amount of foam, these two points determine its high cement proportion.

 

This is the fundamental difference between it and aerated concrete. Due to the use of autoclave, aerated concrete mainly depends on the hydration reaction of fly ash and lime under high heat and high pressure to produce gelling, and cement is auxiliary.

 

When foam concrete is produced at room temperature, active micro-aggregate will not produce hydration reaction quickly, and its foam still depends on the cementation of cement. Therefore, the mix proportion of foam concrete should be cement as the main body and high cement proportion should be adopted.

 

In general, the amount of cement should account for 50% of the total dry material. 50% should be the minimum limit for curing at room temperature. When pouring on site, the proportion of cement should account for more than 80% of the total dry material. The density of foamed concrete at room temperature is less than 600kg/m3, and the proportion of cement can not be less than 70% of the total material. When the density is less than 400kg/m3, the proportion at room temperature should account for more than 90% of the total dry material.

 

In the design of cement proportion, the following factors should be considered:

 

1. The variety of cement. The cement varieties with high early and late strength (such as double fast Portland cement) can appropriately reduce the proportion, while the cement varieties with low late strength or low early strength should increase the cement proportion.

 

2. The strength grade of cement. The proportion of high strength grade cement can be reduced, while that of low strength grade cement should be increased.

 

3. The quality of cement. The proportion of the cement of the new dry rotary kiln in the large factory can be reduced appropriately, while the cement in the shaft kiln of the small factory or the cement with a large amount of admixture should be properly increased.

 

4. The density and strength requirements of foam concrete. The proportion of cement with low density or high strength requirement should be increased, while that with high density or low strength requirement can be reduced.

 

Concrete Additives Supplier

TRUNNANO is a reliable foaming agents supplier with over 12-year experience in nano-building energy conservation and nanotechnology development.

If you are looking for high-quality CLC foaming agents, please feel free to contact us and send an inquiry. (sales@cabr-concrete.com)

We accept payment via Credit Card, T/T, West Union, and Paypal. TRUNNANO will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.

(How to mix cement materials in foam concrete construction?)