Professional solutions on concrete addtives, Concrete Foaming Agent, Superplasticizer, CLC Blocks Additives, and foaming machine
(PCE Powder – Environmentally Friendly, Green and Pollution-Free High Water Reducing Admixture For Concrete) PCE powder is a new type of environmentally friendly, green and pollution-free high water reducing admixture for concrete.…
(Foam Generator For AirCrete) The foam generator is a device used to inject foam into the concrete mix. It works by pumping water and air through a stainless steel foam wand, similar…
(Types of Concrete Release Agent) Product Overview Form release agents are used to prevent the bonding of fresh concrete to the forming surface (plywood, steel or aluminum) and allow for clean stripping.…
(Synthetic Foaming Agent For Concrete) Foam concrete is a lightweight construction material produced by injecting tiny air voids into the cement paste. It is characterized by low density, lightweight properties and high…
(What Admixture For Early Strength?) What admixture for early strength? Increasing concrete’s early strengths is a common construction requirement. Concrete with increased early strength can be used for rapid form reuse, precast…
(Foam Generator) A foam generator is a machine that generates firefighting foam bubbles by mixing a firefighting foam concentrate with water (premix solution) and mechanically agitating it to produce air-filled foam bubbles.…
(Polycarboxylate Superplasticizer That Does Not Adsorb on Cement) Polycarboxylate superplasticizers are a type of polymerized water-reducing admixture used to modify the viscosity, plasticity and shrinkage properties of concrete. These admixtures work by…
(Concrete Superplasticizer) A concrete superplasticizer is a specialized admixture that lowers the water-cement ratio and improves workability of the concrete. It also reduces the permeability of the concrete and increases its durability.…
(Cellular Concrete) cellular concrete is an extremely lightweight, porous concrete material. Developed in 1923, it contains homogeneous air bubbles embedded throughout the mix. This air-filled foam can account for up to 80%…
(Factors Affecting Concrete Early Strength) concrete early strength is a term used to describe a concrete mixture that achieves compressive strengths greater than 21 MPa at 24 hours after site pouring. This…
(The Release Agent Market) release agent is a coating used to lubricate and protect a material from adhesion or splatter. It is used on a range of products including rubber, paint, concrete…
(What Admixture For Early Strength?) What admixture for early strength? Various kinds of concrete admixtures have been developed to improve the performance of concrete. They are added to the concrete mix during…