TR30 CLC Foaming Machine Concrete Foam Generator

PRODUCT PARAMETERS

Model: TR30 Maximum foam output(m3/h): 7.5 Motor voltage(V) : 220 Work rate(KW): 3 Foaming speed(L/m): 120 Bubble bleeding(kg/m3): 46 Dimensions(cm): 120*50*90 Weight(kg): 120 Foam generators are specifically designed to make foam for foamed concrete and operate in conditions common in buildings and construction sites. Our foam generators are rugged and can operate in harsh conditions. They are sealed in a sturdy metal cabinet and have filters to keep out dirt and dust.
Description
REQUEST A QUOTE

Description

Overview of TR30 Foam Generator

Foam generator is the core equipment of foam concrete production, which significantly impacts the quality of foam concrete. An excellent foam generator for concrete not only has a high foam output, but more importantly, the quality of the foam produced is outstanding. TR30 foam generator developed by our company. It can be used in laboratories, small-scale foam concrete cast-in-situ projects, and pilot lines of foam concrete products. The outstanding advantages of the TR30 foam generator are low foam moisture content, more foaming agents, high foam uniformity, large foam output, and other benefits.

Parameters of TR30 Foam Generator

ModelTR30
Maximum foam outputm3/h)8
Motor voltage(V)220
Work rate(W)1500
Pump suction(m)1-3
Dimensions(cm)120*50*90
Weight(kg)120

Usually Need to BDisassembled

1. After working for a long time, it is found that the foam shape is not good, usually more than three months.

2. Pipe blockage: Some foaming agents remaining in the bubble tube will form a solid residue. In this case, the foam cannot be produced normally, or the pipeline pressure increases sharply. At this time, all the old steel balls need to be taken out and then replaced with a new one. The ball is fine. Steel wire ball specification requirements: Each blowing tube needs to be filled with about 12-15 steel wire balls. Too much or too little will affect or even destroy the foam’s performance. 

Precautions

1. Remember to use electricity safely. If water or foam touches the circuit, you must immediately cut off the power at the remote end to ensure safe production.

2. Air will be in the pipeline when it is used for the first time. The foaming liquid has not been pumped into the equipment quickly. You can wait for tens of seconds until the liquid is filled with the entire suction tube, and the foaming operation can be performed normally.

3. Do not start the equipment when the pipeline is blocked to prevent damage to the components due to overpressure in the pipeline.

why choose us 

Company Profile

TRUNNANO is the global leader in Low-Density Cellular Concrete (LDCC), Celluar Light Concrete (CLC), and advanced engineered foam solutions. Known globally for its commitment to research, innovation, and applied expertise, we have been providing engineered foam solutions since the early 2012’s.

We can supply high-quality equipment such as TR-11 Mini Foam Generator for CLC Blocks, TR75 7.5 kW CLC Foam Generator for Lightweight Concrete, TR30 CLC Foaming Machine Concrete Foam Generator, 13kw High Expansion Foam Generator, TR10 Concrete Blocks Making Machine and other concrete relative machines all over the world.

The company has a professional technical department and quality supervision department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.Send us an email or click on the needed products to send an inquiry: sales@cabr-concrete.com

Payment

T/T, Western Union, Paypal, Credit Card etc.

Shipment

By air, by sea, by express, as customers request.

FAQ

Q1

How to choose a suitable CLC foaming machine concrete foam generator?

Answer: 

Choosing a suitable CLC foaming machine concrete foam generator needs to consider factors such as production volume, bubble size and distribution, concrete strength, etc. Choose a foaming machine with appropriate specifications and performance according to actual needs to meet different engineering requirements.

Q2

How to install and use CLC foam machine concrete foam generator?

Answer: 

The installation and use of CLC foam machine concrete foam generator needs to be carried out in accordance with the instructions and operating guidelines. It is necessary to connect the generator to a concrete mixing station or on-site mixing equipment, and adjust appropriate parameters, such as mixing time, rotation speed, etc., to ensure uniform distribution of bubbles in the concrete.

Q3

How to maintain and maintain CLC foaming machine concrete foam generator?

Answer: 

Maintenance and maintenance of the CLC foaming machine concrete foam generator requires regular cleaning of the equipment, inspection of the wear of components such as blades and bearings, and timely replacement of seriously worn components. At the same time, attention should be paid to the lubrication and dust-proof measures of the equipment to keep the equipment in good working condition.

Q4

What are the common faults of CLC foaming machine concrete foam generator? How to solve?

Common failures of CLC foaming machine concrete foam generators include blade wear, motor failure, gas path problems, etc. For blade wear problems, the blades need to be replaced; for motor failure problems, the motor circuit and components need to be checked; for air circuit problems, the air pipes and seals need to be checked for leaks.

Q5

How to improve the production efficiency and product quality of CLC foaming machine concrete foam generator?

Answer: 

Improving the production efficiency and product quality of CLC foaming machine concrete foam generator requires selecting high-quality raw materials and optimizing parameters such as batching ratio and mixing time. At the same time, maintaining equipment in good maintenance and repair status and solving fault problems in a timely manner can also improve production efficiency and product quality.

Q6

What is the future development trend of CLC foaming machine concrete foam generator?

Answer: 

The future development trend of CLC foaming machine concrete foam generator may include intelligence, automation and environmental protection. By introducing technologies such as sensors, controllers and artificial intelligence, intelligent control and automated operation of equipment can be achieved. At the same time, the development of new environmentally friendly materials and energy-saving technologies may also become the future development direction.

Q7

How to dispose of waste from CLC foaming machine concrete foam generator?

Answer: 

CLC foaming machine concrete foam generators that are no longer in use need to be disposed of in accordance with relevant environmental protection regulations. You can choose to recycle or discard to ensure no environmental pollution.

REQUEST A QUOTE

REQUEST A QUOTE